Flywheel holding tool

---

 

Here's a little tool I made to hold onto your flywheel and keep it from moving while you're either trying to remove it or reinstall it onto your engine

 

It's pretty simple...

 

• Get a spare flywheel

 

• Knock off the grooved ring

 

• Cut a small section out of it

 

• Cut a groove into the small section (just big enough for the flywheel dowel to fit into)

 

 

The picture speaks for itself...

 

 

 

Neat, eh?

 

---

 

Dreams of Drifting Copyright © 01/2000 Chris Migallo

all rights reserved